PE /polyethylene
CAS No.: 9002-88-4 | Other Names: PE | MF: [CH2 CH2 ]n |
EINECS No.: 0 | Place of Origin: Anhui China (Mainland) | Type: Synthetic Fibers, Synthetic Resin and Pla... |
Brand Name: CM | Model Number: PE | standard color: white |
Packaging Detail: | 25kgs per woven bag or as your requirement. |
Delivery Detail: | 1-2 weeks after down payment |
Type :HDPE,LLDPE,PE,LDPE etc.
CSA No.:9002-88-4
MF: [CH2 CH2 ]n
Glass Fiber PE PE-G45
Features
(1) Reinforced PE
(2) Excellent mechanical property
(3) Excellent freeze resistance property
(4) Outstanding dimensional stability
Application
(1) Injection molding
(2) Reinforced Masterbatch
(3) Board
(4) Pipeline
Properties
Test Project | Test Methods | Unit | Typical Values[1] |
Tensile Stress | GB/T1040-92 | Mpa | 50-70 |
Flexural Stress | GB/T9341-2000 | Mpa | 60-80 |
Flexural Modulus | GB/T9341-2000 | Mpa | 3200-3800 |
Notched Impact Strength | GB/T1043-93 | KJ/m2 | ≥10 |
Elongation At Break | GB/T1040-92 | % | 10-20 |
Heat Distortion Temperature | GB/T1634-2004 | °C | 110-130 |
MFR | GB/T3682-2000 | g/10min | 0.1-5 |
Testing Condition | 23±2°C, 50±5%RH |
[1] Typical Values are average statistics in lab for reference. They are not used as products standards.
Processing Conditions
Start Point | Range | ||
Melt Temp | 140°C | 120-160°C | |
Barrel Zone Temp. | Rear | 140°C | 140-150°C |
Center | 145°C | 140-155°C | |
Front | 150°C | 145-160°C | |
Mold Temp. | 30°C | 20-50°C | |
Processing Temp. Limit | 160°C | ||
Injection Speed | Moderate to High | ||
Pre-Dry Requirements | 60°C, 2h |
Note All the statistics above are for reference and can be adjusted according to different requirements