Water-based Single Component Air-drying Primer Coats/Metal paint
Jelee Brand water-borne air-drying metal paint is made up of water-borne acrylic resin and inorganic adhesive and antiseptic and organic pigments and special auxiliary, etc. It is single pack air-drying coating.
Jelee Brand water-borne air-drying metal paint has advantages of strong adhesive & fast drying & abrasion resistance & scratch resistance & acid resistance & ackali resistance & easy of construction.
Film Performance :(25degree 2880 min )
Item | Tec Data |
Film Appearance | Leveling and smooth (Color is based on requirements from customers) |
(60°)Gloss | ≤20 |
Drying condition(25°C,relative humidity 65%) | Surface Dry ≤30min Actural Dry ≥48h |
Pencil hardness (Zhonghua Brand) | ≥H |
Cross Cut test for Adhesion | ≤1 level |
Flexibility | ≤2mm |
Impact Test | ≥50kgcm |
water resistance(dipping into the distilled water 240h) | Non-bubble, non-peeling, Recover |
alcohol résistance(dipping into the concentration of 60% for 72h) | Non-bubble |
Acid resistance silicone glass cream for 24h | Non-bubble, non-wrinkling |
Alkali Resistance(dipping into 55of solidum hydroxide for 24h) | Non-peeling, non-bubble, |
The Ecological safe performance
1.It does not contain formaldehyde nor free TDL.
2.It does not contain benzene or methylbenzene or xylene.
3. Non-flammable, non-odorless.
4.The content of VOC is superior to the environmental standard requirement.
5.SGS report could be submitted, if it is required by customers.
Notice
1.The coating item cannot touch water before the film is dry.
2. This product is water-borne coating, and do dot mixed with other kinds of oil.
3. The relative temperature would not below 65%, and the temperature would not be below 8 degree.
4. Pigment paint would have sediment after long-term storage. Consequently, the paint should be well-distributed stirred before using, so that colors will not divide evenly.
5.Multi-layer coating is needed; construction could start after the coating on the bottom is dry.
6.In the case of painting into eyes and it is to wash with water immediately and go to the hospital if it is necessary.
Notice in the transportation
1.The layers should conform to the specified scope. ( Do not exceed 3 layers)
2.Handling should be gentle, and backwards and overturn and collide are forbidden to prevent leakage.
3.Anti-freezing measures should be well done during transportation in winter, and do not transport below 0 degree.